Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
Subcategories
There are 8 products.
45x8x6 emery for sirman slicer and compatible fine grain
45X8X6 SHARPENING STONE FOR SIRMAN SLICERS
AGATA250/275/300/330/350
GEMMA 300
MAINZ 300
OPALE 300
QUARZO250/275/300
TOPAZ 275
VAS 250/275/300
VCO 250/275/300
VCS 300
19300207
AND COMPATIBLE MODELS, FINE GRIT
48x15x8 emery for oms slicer and coarse grain compatible
48X15X8 COARSE-GRIT GRINDING WHEEL FOR OMS, SIRMAN PLD, LEO AND COMPATIBLE SLICERS
40x8x6 emery for ironveed slicer and coarse grain compatible
Coarse-grit abrasive grinding wheel, 40x8x6 mm (Ø40 / thickness 8 / bore 6), for Ironveed slicers, Sirman models, Fama 300 FA302/FA303 and compatible models. Sharpens the blade edge by removing metal; paired with the fine-grit wheel (same size) for finishing. Replace when worn.
50x8x8 emery for ironweed vandall slicer and compatible fine grain
50X8X8 SHARPENING STONE FOR IRONWEED SLICER AND COMPATIBLE MODELS, FINE GRIT
Vandall model Mark S35 G1066
45x9x6 emery for sirman slicer and compatible coarse grain for sharpening
45x9x6 coarse-grit sharpening stone for Sirman and compatible slicers, for blade sharpening
40x8x6 emery for oms slicer and coarse grain compatible
40X8X6 SHARPENING STONE FOR OMS SLICER AND COMPATIBLE MODELS, COARSE GRIT
40x8x6 emery for slicer oms and compatible fine grain
40X8X6 SHARPENING STONE FOR OMS SLICERS AND COMPATIBLE MODELS, FINE GRIT
40x8x6 emery for ironweed slicer and compatible fine grain
Fine-grit abrasive sharpening stone, 40x8x6 mm (Ø40 / thickness 8 / hole 6), for Ironweed, Berkel VC30, Fama (code FA30G22.11) slicers and compatibles. This is the finishing stone: it smooths the edge and removes the burr after sharpening with the coarse-grit stone (used together as a pair). Replace when worn.