Filter By

Bestsellers

BLADE SLICER 250E / 40F / 3V / 210i / 17,5h C45

-10%

blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e

€50.60 €56.22 -10%

  BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E

(E) Diameter Blade		250
(V) Number of holes		3
(F) Dim. Central hole		40
(H) Blade height (thickness)		17.5
(I) Inner blade measurement (blade guard)		210

VISIT THE BLOG FOR MORE INFORMATION

BLOG LAMA AFFETTATRICE

Add to Compare

-10%

Add to Compare

neutral white oil pack for slicers 50 ml

€7.69 €8.54 -10%

Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.

Add to Compare

BLADE SLICER 220E / 40F / 3V / 180i / 15,5h C45

-10%

Add to Compare

blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands

€45.20 €50.22 -10%

BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL

(E) Diameter Blade 220

(V) Hole Number 3

(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION

Add to Compare

hand protection slicer fac and swedlinghaus model 195 220 250r 250e

€24.40

Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.

Add to Compare

All best sellers

TOOTHED BELTS

The toothed (or synchronous) belt transmits motion without slipping thanks to teeth that mesh with the pulley — a different technology from the flat or trapezoidal belts fitted on other slicer models.

Available profiles: this range mainly covers L and XL profile belts — two toothing standards with a different pitch, not interchangeable: an XL belt won't mesh with a pulley made for an L profile.

How to read the dimensions: each belt is identified by profile, outer length and width (for example 150XL 037 H.10 means XL profile, length code and 10mm width) — all three pieces of information are needed for the correct replacement.

If your slicer uses a different drive technology, see Flat Belts or Trapezoidal Belt.

Frequently asked questions

What's the difference between L and XL profile?
They're two toothing standards with a different pitch: a toothed belt for one profile won't mesh with pulleys made for the other profile.

How do I measure the toothed belt I'm replacing?
Check the code printed on the side of the original belt (profile, length and width); alternatively count the teeth and measure the width with a caliper.