Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
Subcategories
There are 15 products.
50x8x8 emery for ironweed vandall slicer and compatible fine grain
50X8X8 SHARPENING STONE FOR IRONWEED SLICER AND COMPATIBLE MODELS, FINE GRIT
Vandall model Mark S35 G1066
suction cup foot d.8 mm large for slicer
Large rubber suction-cup foot, 8 mm (M8) thread, 35 mm height, for slicers. Oversized version for heavier machines (Swedlinghaus spare parts category included): anchors the machine to the work surface (suction grip) and absorbs vibrations. Safety part to replace when the rubber is hardened or no longer grips; replacing all four is recommended. Not to be confused with the small 5 mm foot.
45x13x8 emery for rheninghaus slicer and compatible coarse grain for sharpening
Coarse-grit abrasive sharpening stone, 45x13x8 mm (Ø45 / thickness 13 / hole 8), for Rheninghaus slicers and compatibles. Sharpens the blade edge by removing metal; paired with the fine-grit stone for finishing. Thicker than the Ø45 8 mm stones: check thickness and hole before purchasing. Replace when worn.
bearing 6205 dim. 52x25 sp. 15mm for swedlinghaus motor slicer
6205 ball bearing, Ø25 mm bore, Ø52 mm outer diameter, 15 mm width (DIN 625). For Swedlinghaus 350 slicer motor, 12/22/32 CE meat grinders, GS106/GS107 grater.
suction cup foot d.8 mm large for slicer (pcs4)
SUCTION-CUP FOOT Ø 8 mm LARGE H35 mm PACK OF 4
also fits GGM Gastro model AM300HA
aff.ce inc.tv blade cover tie rod with swedlinghaus micro d.8x176
Blade-cover tie rod with micro switch for Swedlinghaus CE slicer (INC.T.V.). Threaded shaft that secures the blade cover and actuates the safety micro switch. Size: Ø 8 x 176 mm. Code SWEAFF0007.
- -19%
flat belt j 23x457 10 ribs for swedlinghaus slicer
FLAT BELT J 23X457 10 RIBS
Graduated knob with pin diameter 18mm length 73mm white bezel clock diameter is 68
Graduated dial knob with pin, pin diameter 18 mm, length 73 mm, white faceplate, dial diameter Ø 68 mm.
For SIRMAN LEO and PLD slicers (pin protrusion 40 mm).
pinion for crown z15 swedlinghaus
Z15 pinion (15 teeth) for the gear-driven transmission assembly of Swedlinghaus slicers, to be paired with the matching crown gear. Agwsit spare part.
tie rod blade cover 300/330/350/370/380 swedlinghaus vertical d.8x200
Blade-cover tie rod for Swedlinghaus vertical slicers 300/330/350/370/380. Size Ø 8 x 200 mm. Fastens the blade cover to the machine and allows removal for cleaning. Code SWEAFF0005.
clutch roller diam. 80 hole 35 sp 27 swedlinghaus
protection ring model af370vs-gr brand swedlingahus
Protection ring for Swedlinghaus 370 slicer, model AF370VS-GR: the guard that covers the blade leaving only the cutting section exposed, paired with the safety microswitch.