Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
toothed belt 170xl 037 h.10
TOOTHED BELT 170XL 037, HEIGHT 10 mm
circumference length 431.80 mm
tooth pitch (037) 9.5 mm
Toothed (timing) belt 170XL 037, height 10 mm: circumference 431.80 mm, tooth pitch 9.5 mm.
The toothed belt transmits drive synchronously (with no slippage) between the motor pulley and the tool. It is a wear part: the teeth can wear down, crack or skip, causing loss of synchronisation. It should be replaced when the teeth are deformed or the belt is damaged.
Designation 170XL, width 037, height 10 mm. Check the pitch (9.5 mm), number of teeth and width against your original belt.
Specific References
- MPN
- AGWS-2236
Customers who bought this product also bought:
toothed belt 180xl 025
180XL 025 timing belt, closed loop: circumference 457.20 mm, pitch 5.08 mm, width 6.35 mm, 90 teeth.
(031) product press arm model 190/220 ausonia
Food press arm (code 031) for RGV Ausonia 190/220 and Mary Silver 220 slicers.
(044) ausonia engine gear 190/220
Motor transmission gear (code 044) for RGV Ausonia 190/220, Q228 and Smarty 170 slicers. Double gear 10+40 teeth: ring gear Ø 42.5 mm / 40 teeth, pinion Ø 15.5 mm / 10 teeth, height 32 mm. Wear part: replace if the motor runs but the blade does not turn.
IMMEDIATE AVAILABILITY OVER THE HOLIDAY PERIOD
- -10%
(009) blade 190 mm smooth for mod. Ausonia 190
009 SMOOTH BLADE 190 mm FOR MOD. AUSONIA 190
FITS SLICER BOMANN - ALA 519 - CAD - OSTEBA - TRISTAR - AICOK
TOOTHED BELT 170XL 037, HEIGHT 10 mm
circumference length 431.80 mm
tooth pitch (037) 9.5 mm