Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
- Out-of-Stock
anello protezione lama affettatrice sirman modello galileo 350
Blade protection ring for the Sirman Galileo 350 slicer (Ø 350 mm blade set at 38°). Fixed guard, secured to the machine body, covering the blade edge along the section not used for cutting: a component required by the EN 1974 standard. Replace it if dented, out of round or corroded, to avoid contact with the blade and ragged slice edges.
Blade protection ring for the Sirman Galileo 350 slicer, the gravity model with a 350 mm blade set at 38°, a 350x320 mm plate and a 365 mm carriage stroke.
On the Galileo 350 the ring works alongside the blade cover and the blade extractor, but its job is different from both: it is the fixed guard wrapping the edge around the whole circumference except the cutting sector and, unlike the blade cover which comes off at every cleaning, it stays secured to the machine body. It is one of the components required by the EN 1974 standard on safety and hygiene requirements for circular-blade slicing machines with a reciprocating carriage.
It should be replaced when it shows dents or has gone out of round, typically after a knock while removing the blade, or when the surface is corroded. A ring that has lost its shape no longer seats evenly, leaves a step along the edge of the slice and can end up touching the spinning blade. Keeping it in good order also keeps the non-cutting area free of greasy residue, which is necessary for machine hygiene between services.
Spare part for the Galileo 350 slicer with 350 mm blade.
Blade protection ring for the Sirman Galileo 350 slicer (Ø 350 mm blade set at 38°). Fixed guard, secured to the machine body, covering the blade edge along the section not used for cutting: a component required by the EN 1974 standard. Replace it if dented, out of round or corroded, to avoid contact with the blade and ragged slice edges.