Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
45x10x8 emery for noaw slicer and compatible fine grain
Fine-grit sharpening stone (grinding wheel) 45x10x8 mm for NOAW, Berkel and compatible slicers.
Fine-grit sharpening stone (grinding wheel), size Ø 45 x 10 mm thick x 8 mm bore, for NOAW, Berkel and compatible meat slicers. The fine grit is intended for finishing and deburring the blade edge after sharpening.
Features:
- Type: sharpening stone / grinding wheel, fine grit
- Diameter: 45 mm
- Thickness: 10 mm
- Centre bore: 8 mm
- Compatibility: NOAW, Berkel and compatible slicers
- Spare part code: 210NWFC10
Data sheet
- DIAMETRO SMERIGLIO
- 45
- FORO CENTRALE SMERIGLIO
- 8
- SPESSORE SMERIGLIO
- 10
Specific References
- MPN
- AGWS-210
Customers who bought this product also bought:
45x8x6 emery for slicer fac e compatible diameter 45mm thickness 8mm hole 6mm coarse grain for sharpening
Coarse-grit abrasive grinding wheel, 45x8x6 mm (Ø45 / thickness 8 / bore 6), for FAC slicers, Fama 302 and Fama 275/300 (ref. FA30G022.17), RGV and compatible sharpeners. Sharpens the blade edge by removing metal; paired with the fine-grit wheel (same size) for finishing. Replace when worn.
leg mod.250i-275i-300 and temple d.12 fac
Foot bracket with 12 mm diameter rod for the food pusher arm of FAC slicers, models 250i, 275i, 300. Replace if bent, loose or worn.
45x13x8 emery for rheninghaus slicer and compatible coarse grain for sharpening
Coarse-grit abrasive sharpening stone, 45x13x8 mm (Ø45 / thickness 13 / hole 8), for Rheninghaus slicers and compatibles. Sharpens the blade edge by removing metal; paired with the fine-grit stone for finishing. Thicker than the Ø45 8 mm stones: check thickness and hole before purchasing. Replace when worn.
48x15x14,3 emery for omas slicer and compatible fine grain
Fine-grit grinding wheel (sharpening stone) 48x15x14.3 mm for Omas and compatible slicers.
O-ring seal for stuffing machine brand amb model rl 25 vertical hydraulic
O-ring piston seal for the AMB model RL25 vertical hydraulic sausage filler (25 litre cylinder). Prevents meat backflow and keeps working pressure. Consumable component. Code AGWSAMBTRI0093.
45x10x8 emery for noaw slicer and coarse grain compatible
45x10x8 sharpening stone for Noaw and Berkel slicers and compatible models, coarse grit
45x8x6 emery for fac slicer and compatible sharpeners diameter 45mm thickness 8mm hole 6mm fine grain for blade finishing
Fine-grit abrasive grinding wheel, 45x8x6 mm (Ø45 / thickness 8 / bore 6), for FAC, Fama 302, RGV slicers and compatible sharpeners. This is the finishing stone: it hones the edge and removes the burr after sharpening with the coarse-grit wheel (with which it is used as a pair). Replace when worn or glazed.
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45
"blade for slicer 250 diameter 25cm three hole central hole 40mm c45
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
Fine-grit sharpening stone (grinding wheel) 45x10x8 mm for NOAW, Berkel and compatible slicers.