Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
fan for castellotti motors model h71
Replacement fan for Castellotti model H71 motors for meat slicers. Ensures cooling of the windings and prevents motor overheating.
- Outer Ø 105 mm
- Shaft bore Ø 11 mm
Replacement cooling fan for Castellotti model H71 electric motors, used in professional meat slicers (including Sirman-branded models). The fan is keyed onto the motor shaft and, as it rotates, forces the air flow over the windings to dissipate their heat: it is an essential component to prevent overheating and extend the life of the motor.
Technical specifications:
- Outer diameter: Ø 105 mm
- Bore diameter (shaft): Ø 11 mm
- Application: Castellotti model H71 motors for meat slicers
When to replace it: the fan should be changed if the blades are broken, cracked or deformed, if it sits loose on the shaft, or when you notice unusual vibration, noise or excessive motor heating during use. An intact fan ensures proper cooling and smooth, balanced rotation.
Practical tip: before purchase, check the bore diameter (11 mm) and the outer diameter (105 mm) to make sure it is compatible with your motor. When fitting, position it correctly on the shaft and pair it with its fan cover.
Specific References
- MPN
- AGWS-3361
Customers who bought this product also bought:
43x8x6 emery for agw slicer and compatible sharpeners diameter 43mm thickness 8mm hole 6mm fine grain for blade finishing
SHARPENING STONE FOR AGW SLICERS AND COMPATIBLE SHARPENERS, DIAMETER 43MM, THICKNESS 8MM, HOLE 6MM, FINE GRIT FOR BLADE FINISHING
| STONE DIAMETER | 43 | |
| STONE THICKNESS | 8 | |
| STONE CENTRE HOLE | 6 |
- -19%
flat belt tb2 20x526 10 ribs for slicer
FLAT BELT TB2 20X526 10 RIBS
- -19%
flat belt tb2 15,5x430 8 ribs for slicer
FLAT BELT TB2 15,5X430 8 RIBS FOR SLICER
castellotti motors fan cover h71 model
Fan cover cap for Castellotti H71 motors fitted to professional slicers. Protects the cooling fan from impacts and dust and keeps it securely in place. Dimensions: outer Ø 133 mm x H 55 mm. Code AGWSAFF0565. Pairs with the fan for the same motor (code AGWSAFF0564).
flat belt tb2 16x360 8 ribs for slicer sirman
flat belt tb2 16x360 8 ribs for slicer sirman
AGATA250/250CE/275/
MIRRA 275/275 CE/300/300 CE/
OPALE 300
QUARZO 250/275/300
43x8x6 emery for agw slicer and compatible sharpeners diameter 43 thickness 8mm hole 6mm coarse grain for sharpening
Replacement coarse-grit emery (abrasive wheel) for sharpening the blade of AGW slicers and compatible sharpener assemblies.
- Diameter: 43 mm
- Thickness: 8 mm
- Centre hole: 6 mm
- Grit: coarse, for blade sharpening
Check that diameter, thickness and hole match the wheel on your sharpener.
- -19%
(1072) belt 11 ribs, development 600 mod. v 370 kelly
V-ribbed belt, 11 ribs, 598 mm length, for RGV Kelly series slicer, model 370 V. Transmits motion from the motor to the blade unit.
(582) capacitor µf 12.5 for motor h30 / 40/50 230v
12.5 µF capacitor for 230V single-phase motors H30/H40/H50 on mincers, graters and slicers. Provides the phase shift for motor starting. Code 582. Check µF and voltage on the original capacitor.
Replacement fan for Castellotti model H71 motors for meat slicers. Ensures cooling of the windings and prevents motor overheating.
- Outer Ø 105 mm
- Shaft bore Ø 11 mm