Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
pilot burner with nozzle 0.2
Pilot burner complete with Ø 0.2 nozzle for professional gas cooking equipment. It generates the standing flame that ignites the main burner and keeps the thermocouple hot. Replace it when the pilot flame stays yellow, short or unstable even after cleaning the nozzle.
Pilot burner complete with Ø 0.2 nozzle (reference AGWS4.003.032). The pilot burner is the small standing flame of gas catering equipment — ranges, griddles, fryers, bratt pans, boiling pans and gas ovens: it stays lit on standby and ignites the main burner on heat demand, keeping the thermocouple hot so that the gas safety valve stays open.
- Supplied: pilot burner with nozzle included
- Nozzle: Ø 0.2
- Application: professional gas cooking equipment
When the pilot struggles: a yellow, short or unstable flame that does not wrap around the thermocouple, difficult ignition or a pilot that goes out as soon as the knob is released are the classic symptoms. The cause is often a nozzle clogged by residues and oxide; if the problem persists after cleaning, or the pilot body is corroded and deformed, replacing the complete assembly with a new nozzle restores a stable, well-directed flame. While you are at it, also check the condition of the thermocouple, which works in contact with the pilot flame.
Specific References
- MPN
- AGWS-2645
Pilot burner complete with Ø 0.2 nozzle for professional gas cooking equipment. It generates the standing flame that ignites the main burner and keeps the thermocouple hot. Replace it when the pilot flame stays yellow, short or unstable even after cleaning the nozzle.