Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
electric resistance cimbali m20 m32 3gr. 5790w 6poles with sheath
Boiler heating element for Cimbali M20 and M32 3-group espresso machines: 5790 W, 230 V single-phase, 6 poles, 595 mm long, with thermostat bulb sheath. Replace when the machine fails to build pressure, heats slowly or trips the RCD breaker.
Boiler heating element for Cimbali M20 and M32 3-group professional espresso machines. 5790 W at 230 V, 6-pole connection, complete with thermostat bulb sheath. This is the component that heats the boiler water and maintains the working pressure needed for coffee and steam delivery.
- Power: 5790 W
- Voltage: 230 V
- Phase: single-phase
- Length: 595 mm
- Poles: 6
- Supplied with: thermostat bulb sheath
- Compatibility: Cimbali M20, Cimbali M32 (3-group versions)
A failing heating element shows these symptoms: the machine does not build pressure or takes much longer than usual to heat up, the RCD breaker trips at switch-on (compromised element insulation), or the boiler stays cold with the machine powered. Limescale is the main cause of failure: regular boiler descaling extends the life of this part. Replacement requires draining the boiler and should be carried out by a qualified technician.
Specific References
- MPN
- AGWS-3365
Boiler heating element for Cimbali M20 and M32 3-group espresso machines: 5790 W, 230 V single-phase, 6 poles, 595 mm long, with thermostat bulb sheath. Replace when the machine fails to build pressure, heats slowly or trips the RCD breaker.