Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
43x12x6 emery for slicer oms and compatible coarse grain for sharpening
43X12X6 SHARPENING STONE FOR OMS SLICERS AND COMPATIBLE MODELS, COARSE GRIT, FOR SHARPENING
Data sheet
- DIAMETRO SMERIGLIO
- 43
- FORO CENTRALE SMERIGLIO
- 6
- SPESSORE SMERIGLIO
- 12
Specific References
- MPN
- AGWS-230
Customers who bought this product also bought:
40x8x6 emery for ironweed slicer and compatible fine grain
Fine-grit abrasive sharpening stone, 40x8x6 mm (Ø40 / thickness 8 / hole 6), for Ironweed, Berkel VC30, Fama (code FA30G22.11) slicers and compatibles. This is the finishing stone: it smooths the edge and removes the burr after sharpening with the coarse-grit stone (used together as a pair). Replace when worn.
40x10x6 emery for bizerba slicer diameter 40mm thickness 10mm hole 6mm fine grain for finishing
SHARPENING STONE FOR BIZERBA SLICER, DIAMETER 40 MM, THICKNESS 10 MM, HOLE 6 MM, FINE GRIT FOR FINISHING
| STONE DIAMETER | 40 | |
| STONE THICKNESS | 10 | |
| STONE CENTER HOLE | 6 |
nylon gear z31 av / 35 bkl
Nylon gear with 31 teeth (Z31), transmission spare part for Berkel AV/35 slicers. Outer diameter 63 mm, bore 40 mm, height 16 mm. The nylon absorbs shocks and protects the metal gears in case of overload.
40x8x6 emery for slicer oms and compatible fine grain
40X8X6 SHARPENING STONE FOR OMS SLICERS AND COMPATIBLE MODELS, FINE GRIT
- -15%
blade for slicer 275 diameter 27.5cm / 25.4 / 4/220/15 c45
Slicer blade Ø 275 / bore 25.4 / 4 holes / inner 220 / thickness 15, C45. Compatible with Kolossal, La Felsinea, Manconi, Omas. Code AGWSLAMAFF0031. Check ALL measurements against your original blade.
43x8x6 emery for agw slicer and compatible sharpeners diameter 43mm thickness 8mm hole 6mm fine grain for blade finishing
SHARPENING STONE FOR AGW SLICERS AND COMPATIBLE SHARPENERS, DIAMETER 43MM, THICKNESS 8MM, HOLE 6MM, FINE GRIT FOR BLADE FINISHING
| STONE DIAMETER | 43 | |
| STONE THICKNESS | 8 | |
| STONE CENTRE HOLE | 6 |
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
50x12x8 emery for colossal slicer and compatible coarse grain for sharpening sharpening
50X12X8 SHARPENING STONE FOR KOLOSSAL AND BERKEL FUTURA SLICERS AND COMPATIBLE MODELS, COARSE GRIT, FOR SHARPENING
43X12X6 SHARPENING STONE FOR OMS SLICERS AND COMPATIBLE MODELS, COARSE GRIT, FOR SHARPENING