Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
- -19%
flat belt tb2 19.5x380 10 ribs
Poly-V flat belt TB2 with 10 ribs for transmitting drive to the blade in slicers and food processing machines.
- TB2 profile (2 mm pitch)
- Width 19.5 mm
- Length 380 mm
- 10 ribs
Size code reads as width × length × number of ribs: it must match the original belt.
The Poly-V flat belt TB2 19.5x380 with 10 ribs is the longitudinally ribbed drive belt that connects the motor to the blade drive pulley in professional slicers and other food processing machines. The longitudinal ribs (Poly-V profile) ensure a firm grip on the pulleys, quiet running and constant torque transmission even at high speeds.
Specifications:
- Profile/series: TB2 (2 mm rib pitch)
- Width: 19.5 mm
- Length (inner circumference): 380 mm
- Number of ribs: 10
The size code reads as width × length × number of ribs: to order the correct replacement, these three values must match the original belt exactly. If the fitted belt is worn or broken, you can check the length by running a piece of string around the two pulleys along the belt path, then counting the ribs.
When to replace it: the belt should be changed when it looks cracked, shiny or glazed, when it loses ribs, when it slips on the pulleys (the blade turns slowly or stops under load), or in case of unusual noise and vibration. Replace it with the motor switched off and the plug disconnected, checking that the pulleys are correctly aligned.
Specific References
- MPN
- AGWS-2818
Customers who bought this product also bought:
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 350 diameter 35cm central hole 57mm four holes material 100cr7
"
SPARE BLADE FOR SLICER? MATERIAL 100Cr6?
very high? adhesive wear resistance?
| (E) Blade diameter | 350 | |
| (V) Number of holes | 4 | |
| (F) Dim. Central hole | 57 | |
| (H) Blade height (thickness) | 22.5 | |
| (I) Inner blade measurement (blade guard) | 280 |
"
oval pushbutton panel with wired led bulb
Giovenzana oval push-button panel with wired LED indicator and 22mm standard panel hole, ready to connect on slicers, meat mincers, grating machines and dough mixers.
- -20%
universal board 230 / 380v tgcetsp for slicer peeler meat mincer grater and mixer for motors up to 3hp
Universal 230/380V electronic control board (TGCETSP) for slicers, potato peelers, meat mincers, graters and dough mixers, for motors up to 3 HP. Works on both single-phase 230V and three-phase 380V with start/stop control.
flat pulley for agata 300 sirman brand
Sirman flat pulley for Agata 300 slicer (exploded-view part no. 22). Component of the flat-belt transmission between motor and blade unit.
Poly-V flat belt TB2 with 10 ribs for transmitting drive to the blade in slicers and food processing machines.
- TB2 profile (2 mm pitch)
- Width 19.5 mm
- Length 380 mm
- 10 ribs
Size code reads as width × length × number of ribs: it must match the original belt.