Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
bell gasket for vacuum sirman sp30
Bell gasket for Sirman SP30 vacuum packing machine. Cross-section profile 5x6 with lip, length 157 cm. Code IW1471230010. It ensures the airtight seal between the lid and the tank: replace it when the gasket is hardened, flattened or cracked, or if the machine no longer reaches the vacuum correctly.
Gasket for the bell (lid) of the Sirman SP30 vacuum packing machine. It is the rubber/silicone element that ensures the airtight seal between the lid and the tank during the suction cycle: without an intact gasket, the pump cannot reach the correct vacuum level and the packing remains incomplete.
Specifications:
- Compatibility: Sirman SP30 chamber vacuum machine
- Cross-section profile: 5x6 with lip
- Length: 157 cm
- Spare part code: IW1471230010
The gasket should be replaced when the profile is hardened, flattened, cracked or deformed, or when the machine struggles to draw the vacuum, takes longer than usual or does not seal evenly: these are the typical symptoms of a worn-out seal. It is a consumable component subject to natural wear over the working cycles. Practical tip: seat the profile in its groove starting from the corners, without stretching it, and clean the groove before fitting to ensure proper adhesion.
Specific References
- MPN
- AGWS-4162
Customers who bought this product also bought:
ISO 32 lt. 1 vacuum pump oil
ISO 32 vacuum pump oil, 1-litre bottle, for the oil-bath pumps of vacuum packing machines (incl. Sirman). It maintains the seal, lubricates and cools the pump: essential for reaching and holding the vacuum. Replace it when the oil is dark or milky or the machine struggles to pull a vacuum. Check in the manual that the pump requires ISO 32 grade.
lubrificant for mechanical parts rgv
RGV lubricating oil in a 125 ml oil can for the mechanical parts of slicers. Suitable for food-service machines.
Bell gasket for Sirman SP30 vacuum packing machine. Cross-section profile 5x6 with lip, length 157 cm. Code IW1471230010. It ensures the airtight seal between the lid and the tank: replace it when the gasket is hardened, flattened or cracked, or if the machine no longer reaches the vacuum correctly.