Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
knurled foot for slicer bkl
Rubber knurled foot with Ø 18 mm push-fit socket for BKL-type flywheel slicers (Berkel and similar). Not screw-in but push-fit: the knurling increases grip on the counter and dampens vibrations, keeping the machine stable. Replace when the rubber is hardened or worn and the machine slips; it's best to replace them all together. Check the Ø 18 mm socket. Minimum order quantity: 4 pieces.
Knurled push-fit foot with Ø 18 mm socket for BKL-type flywheel slicers (Berkel and similar). It is one of the feet on which the base of the flywheel machine rests.
What it's for. Unlike the screw-in feet of electric slicers, this is a push-fit foot: it presses into the base's Ø 18 mm socket. The rubber knurled surface increases grip on the counter and dampens the machine's vibrations during use, keeping it stable.
When to replace it. When the rubber is hardened, worn or cracked and the flywheel slicer slips or "wobbles" on the counter. To keep the base level, it is best to replace all the feet together.
Compatibility and ordering. For BKL-type flywheel slicers with a Ø 18 mm socket; check the socket diameter against the one currently fitted. Minimum order quantity: 4 pieces.
Specific References
- MPN
- AGWS-270
Customers who bought this product also bought:
- -10%
33cm blade for flywheel slicer diameter 330 thickness 19.3 hole 25.4 fly adaptable berkel
33CM BLADE FOR FLYWHEEL SLICER, DIAMETER 330, THICKNESS 19.3, HOLE 25.4, ADAPTABLE TO BERKEL AND BIZERBA - AGWSL330.3310.XXXR01, 100Cr6 steel
| (E) Blade diameter | 330 | |
| (V) Number of holes | 1 | |
| (F) Centre hole size | 25.4 | |
| (H) Blade height (thickness) | 19.3 | |
VISIT THE BLOG FOR MORE INFORMATION
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
50x9x12 emery for slicer marwel ocm and compatible fine grain
Fine-grit emery wheel (blade-sharpening stone) for slicer sharpener assemblies, for finishing/polishing the blade edge.
- Ø 50 mm × thickness 9 mm × hole 12 mm
- Compatible with Marwel and OCM slicers and models compatible with these dimensions
50x12x12 emery for slicer marwel ocm and compatible medium grain
Replacement 50x12x12 medium-grain emery stone for the sharpening unit of Marwel, OCM and compatible slicers (ref. 190MLMT20). Diameter 50 mm, thickness 12 mm, 12 mm centre hole. Restores the blade edge; replace when the stone is worn, glazed or chipped. Check your original stone's dimensions before ordering.
Rubber knurled foot with Ø 18 mm push-fit socket for BKL-type flywheel slicers (Berkel and similar). Not screw-in but push-fit: the knurling increases grip on the counter and dampens vibrations, keeping the machine stable. Replace when the rubber is hardened or worn and the machine slips; it's best to replace them all together. Check the Ø 18 mm socket. Minimum order quantity: 4 pieces.