Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
(483) rgv product press pin ø12x128 mod. 195gl
Steel product pusher pin for RGV Lusso series slicer mod. 195 GL. Shaft on which the pusher arm rotates/slides. Dimensions Ø 12 x 128 mm. Spare part code 483. To be replaced if it shows play or scoring, or if the arm no longer slides properly.
The product pusher pin is the cylindrical steel shaft that is part of the product pusher assembly (pusher arm) on RGV slicers. The pusher arm rotates and slides on this pin, keeping the food pressed against the blade during cutting: it is therefore a structural component that ensures stability and precision in the pusher's movement.
Dimensions:
- Diameter Ø 12 mm
- Length 128 mm
Compatibility:
- RGV Lusso series slicer mod. 195 GL
Spare part code: 483.
When to replace it: the pin should be replaced when it shows play, scoring or ovalisation, when the pusher arm no longer slides smoothly or gets stuck/tilted, or when the pin is bent. A worn pin compromises the correct pressure of the food against the blade and the uniformity of the slices.
Tip: always check the exact model of your slicer and the dimensions (Ø12x128) before purchasing; for any doubts about compatibility with other RGV variants, contact our support.
Specific References
- MPN
- AGWS-1123
Customers who bought this product also bought:
(509) rgv bush for product presser mod. 22/25
Bushing for the product presser of RGV mincers mod. 22/25. Guides the pusher rod that drives meat towards the auger, ensuring straight, play-free sliding. Code 509. Check diameter and length against the original.
product press unit mod. 195/22/25
GROUP PRESSING MOD. 195/22/25
FOR SLICER MODEL LUXURY, LADY AND DOMESTIC DOLLY
LENGTH FROM CENTER GUIDE TO PIN PVC 20 cm
(503) screw for fixing bar (2 pcs) 220/250 with cut
Slotted-head fixing screw for securing the guide bar, sold in pairs (2 pcs), for RGV Dolly Series 22/25 A and 22/25 S (220/250) slicer.
pvc product press unit mod. 195/22/25
Complete PVC food-pusher assembly for RGV gravity slicers 195 / 220 / 250 (including RGV 25 Special Edition Red). This is the arm that holds and guides the food against the blade, allowing you to slice right to the end safely. Complete assembly (not just the hand guard), removable and washable, to be replaced if broken or deformed. For hand protection only, see the dedicated food-pusher finger guard.
(446) special screw (2 pcs) for plate guard mod. 195/20/22/25/275/300
SPECIAL SCREW FOR PARADITA ON THE PLATE MOD. 195/20/22/25/275/300
(623) aluminum screw (2 pcs) for product press bar
ALUMINUM SCREW PER? BAR PRESSAMERCE THREAD 6MA
(482) plate guard mod. 195 / s
Finger guard on the plate for RGV GL195, Luxor 200 and Luxor 220 gravity-feed slicers (code 482). This is the guard fixed onto the plate that shields the hand from the blade edge: a safety component, to be replaced if broken or missing. Hole centre distance 100 mm (measurement to check). A different part from the food pusher's finger guard and from the carriage guard.
Steel product pusher pin for RGV Lusso series slicer mod. 195 GL. Shaft on which the pusher arm rotates/slides. Dimensions Ø 12 x 128 mm. Spare part code 483. To be replaced if it shows play or scoring, or if the arm no longer slides properly.