Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
45x10x10 emery for ortega slicer and coarse grain compatible
Coarse-grit sharpening wheel 45x10x10 mm for Ortega slicer sharpeners and compatible models. Diameter 45 mm, thickness 10 mm, centre hole 10 mm. Performs the main blade sharpening, before finishing with the fine-grit wheel.
Coarse-grit sharpening wheel (emery) for slicer sharpeners, compatible with Ortega machines and compatible models.
- Wheel diameter: 45 mm
- Thickness: 10 mm
- Centre hole: 10 mm
- Grit: coarse
- Compatibility: Ortega slicers and compatible models
In dual-wheel sharpeners, the coarse-grit wheel is the rear one and performs the main sharpening of the blade edge, removing the material needed to restore the cutting edge; this is followed by the fine-grit wheel for finishing. Replace it when it is worn, glazed, or no longer sharpens correctly, so the blade stays sharp and safe.
Data sheet
- DIAMETRO SMERIGLIO
- 45
- FORO CENTRALE SMERIGLIO
- 10
- SPESSORE SMERIGLIO
- 10
Specific References
- MPN
- AGWS-262
Customers who bought this product also bought:
45x8x10 emery diameter 45mm thickness 8mm center hole 10mm coarse grain for sharpening slicer blade
Coarse-grit emery grinding wheel for sharpening meat slicer blades.
- Diameter: 45 mm
- Thickness: 8 mm
- Centre hole: 10 mm
- Grit: coarse
Mounts on the sharpener assembly; normally paired with the fine-grit wheel for deburring the edge.
45x10x10 emery for ortega slicer and compatible fine grain
Fine-grain grinding stone 45x10x10 mm for Ortega and compatible slicer sharpeners. Diameter 45 mm, thickness 10 mm, center hole 10 mm. Finishes the blade edge after main sharpening.
emery 45mm diameter - thickness 8mm - hole 10mm fine grain for finishing for slicer
SHARPENING STONE DIAMETER 45 MM - THICKNESS 8 MM - CENTRE HOLE 10 MM, FINE GRIT FOR FINISHING, FOR SLICERS
| STONE DIAMETER | 45MM | |
| STONE THICKNESS | 8MM | |
| STONE CENTRE HOLE | 10MM |
Coarse-grit sharpening wheel 45x10x10 mm for Ortega slicer sharpeners and compatible models. Diameter 45 mm, thickness 10 mm, centre hole 10 mm. Performs the main blade sharpening, before finishing with the fine-grit wheel.