Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
45x8x10 emery diameter 45mm thickness 8mm center hole 10mm coarse grain for sharpening slicer blade
Coarse-grit emery grinding wheel for sharpening meat slicer blades.
- Diameter: 45 mm
- Thickness: 8 mm
- Centre hole: 10 mm
- Grit: coarse
Mounts on the sharpener assembly; normally paired with the fine-grit wheel for deburring the edge.
Coarse-grit emery grinding wheel for sharpening meat slicer blades. The stone mounts on the sharpener assembly (either removable or built-in) and, acting on the edge of the rotating blade, restores its cutting ability by removing material decisively. The coarse grit performs the actual sharpening; it is usually paired with a second fine-grit wheel, which finishes the job by removing the burr from the edge and refining the cutting edge.
- Diameter: 45 mm
- Thickness: 8 mm
- Centre hole: 10 mm
- Grit: coarse (sharpening/deburring)
Always check that all three dimensions (Ø 45 mm, thickness 8 mm, hole 10 mm) match the wheel currently fitted on your machine: the key factor for interchangeability is precisely the diameter × thickness × hole combination. When to replace it: the wheel should be changed when it is worn, glazed or chipped, when the blade no longer sharpens properly, or when the remaining diameter no longer allows regular contact with the edge. For optimal sharpening, keep the wheel free of grinding residue.
Data sheet
- DIAMETRO SMERIGLIO
- 45
- FORO CENTRALE SMERIGLIO
- 10
- SPESSORE SMERIGLIO
- 8
Specific References
- MPN
- AGWS-153
Related Products
emery 45mm diameter - thickness 8mm - hole 10mm fine grain for finishing for slicer
SHARPENING STONE DIAMETER 45 MM - THICKNESS 8 MM - CENTRE HOLE 10 MM, FINE GRIT FOR FINISHING, FOR SLICERS
| STONE DIAMETER | 45MM | |
| STONE THICKNESS | 8MM | |
| STONE CENTRE HOLE | 10MM |
Customers who bought this product also bought:
45x10x10 emery for ortega slicer and compatible fine grain
Fine-grain grinding stone 45x10x10 mm for Ortega and compatible slicer sharpeners. Diameter 45 mm, thickness 10 mm, center hole 10 mm. Finishes the blade edge after main sharpening.
50x8x8 emery for abm slicer and compatible sharpeners diameter 50mm thickness 8mm hole 8mm
Replacement grinding wheel (abrasive wheel) for ABM slicers and compatible sharpeners. Fits in the sharpener assembly to restore and maintain the blade edge.
- Diameter: 50 mm
- Thickness: 8 mm
- Centre hole: 8 mm
Check that the dimensions match the grinding wheel currently fitted to your machine.
emery 45mm diameter - thickness 8mm - hole 10mm fine grain for finishing for slicer
SHARPENING STONE DIAMETER 45 MM - THICKNESS 8 MM - CENTRE HOLE 10 MM, FINE GRIT FOR FINISHING, FOR SLICERS
| STONE DIAMETER | 45MM | |
| STONE THICKNESS | 8MM | |
| STONE CENTRE HOLE | 10MM |
48x8x14,3 emery for slicer omas ceg atoma and compatible fine grain
Sharpening stone (grinding wheel), fine grit, 48x8x14.3 mm, for Omas, CEG, Atoma slicers and compatible models.
lubrificant for mechanical parts rgv
RGV lubricating oil in a 125 ml oil can for the mechanical parts of slicers. Suitable for food-service machines.
45x10x10 emery for ortega slicer and coarse grain compatible
Coarse-grit sharpening wheel 45x10x10 mm for Ortega slicer sharpeners and compatible models. Diameter 45 mm, thickness 10 mm, centre hole 10 mm. Performs the main blade sharpening, before finishing with the fine-grit wheel.
Coarse-grit emery grinding wheel for sharpening meat slicer blades.
- Diameter: 45 mm
- Thickness: 8 mm
- Centre hole: 10 mm
- Grit: coarse
Mounts on the sharpener assembly; normally paired with the fine-grit wheel for deburring the edge.