Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
48x8x14,3 emery for slicer omas ceg atoma and compatible fine grain
Sharpening stone (grinding wheel), fine grit, 48x8x14.3 mm, for Omas, CEG, Atoma slicers and compatible models.
Sharpening stone (grinding wheel), fine grit, dimensions Ø 48 x thickness 8 x bore 14.3 mm, for Omas, CEG, Atoma and compatible slicers. The fine grit is dedicated to finishing and deburring the blade edge after sharpening.
Specifications:
- Type: sharpening stone / grinding wheel, fine grit
- Diameter: 48 mm
- Thickness: 8 mm
- Center bore: 14.3 mm
- Compatibility: Omas, CEG, Atoma slicers and compatible models
- Part number: 230OSFC10
Data sheet
- DIAMETRO SMERIGLIO
- 48
- FORO CENTRALE SMERIGLIO
- 14,3
- SPESSORE SMERIGLIO
- 8
Specific References
- MPN
- AGWS-215
Customers who bought this product also bought:
48x15x14,3 emery for slicer omas ceg atoma and compatible coarse grain
Coarse-grit grinding wheel 48x15x14.3 mm (diameter x thickness x bore) for the sharpener on OMAS, CEG, Atoma slicers and compatible models. Used for the first sharpening pass on the blade edge: check your machine's original dimensions before ordering.
48x15x14,3 emery for omas slicer and compatible fine grain
Fine-grit grinding wheel (sharpening stone) 48x15x14.3 mm for Omas and compatible slicers.
suction cup foot with insert hole for slicer
SUCTION-CUP FOOT WITH INSERT HOLE — pack of 4, height 32 mm, hole Ø 12 mm
emery 45mm diameter - thickness 8mm - hole 10mm fine grain for finishing for slicer
SHARPENING STONE DIAMETER 45 MM - THICKNESS 8 MM - CENTRE HOLE 10 MM, FINE GRIT FOR FINISHING, FOR SLICERS
| STONE DIAMETER | 45MM | |
| STONE THICKNESS | 8MM | |
| STONE CENTRE HOLE | 10MM |
45x8x10 emery diameter 45mm thickness 8mm center hole 10mm coarse grain for sharpening slicer blade
Coarse-grit emery grinding wheel for sharpening meat slicer blades.
- Diameter: 45 mm
- Thickness: 8 mm
- Centre hole: 10 mm
- Grit: coarse
Mounts on the sharpener assembly; normally paired with the fine-grit wheel for deburring the edge.
Sharpening stone (grinding wheel), fine grit, 48x8x14.3 mm, for Omas, CEG, Atoma slicers and compatible models.