Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
flexible coupling set for gear d.6 mm pcs 6
SET OF SHOCK-ABSORBING GEAR DAMPERS D.6 mm PCS 6
Set of 6 shock-absorbing dampers (rubber buffer inserts) for gear, hole Ø 6 mm.
The dampers are the elastic inserts that cushion the transmission shocks between motor and gear: they absorb the jolts at start-up and the overloads, protecting the gear teeth from breakage and reducing noise and vibration. They should be replaced when they are hardened, crushed or crumbled — the typical symptom is play and mechanical noise in the transmission.
Pack of 6 pieces. Check the hole diameter (6 mm) against the gear of your machine; a Ø 8 mm version is also available.
Specific References
- MPN
- AGWS-2479
Customers who bought this product also bought:
flexible coupling set for gear d.5 mm pcs 6
Set of 6 shock-absorbing inserts (parastrappo), 5 mm diameter, for slicer drive gears: they cushion load shocks between motor and blade gear, protecting the teeth from breakage.
kolossal nylon gear z31
Nylon gear Z31 for Kolossal slicers. Outer Ø 64 mm, inner Ø 36.5 mm, thickness 20 mm, 6 mm shock-absorbing notches.
- -10%
blade for slicer 385 hole 57 4 blade guard screws 315 height 22.5 100cr7
Replacement slicer blade in 100Cr6 steel. Ø 385 mm, centre hole 57 mm, 4 holes/screws, blade guard inner size 315 mm, thickness 22.5 mm.
For SIRMAN Zenith V 390 C, gear-driven. Also fits: ABO 390 CX, ABO 390 VX, GENERAL MACHINES, MARWEL AG390, SIRMAN GALILEO 385, SIRMAN LEONARDO 385.
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
kolossal nylon compass d.12
Nylon bushing D.12 for Kolossal slicer. Low-friction sliding sleeve.
nylon gear z31 for arsa slicer
Nylon gear with 31 teeth (Z31) and shock absorber for Arsa slicers. It transfers motion from the motor to the blade while dampening jolts. Outer Ø 63 mm, inner bore 36.5 mm, thickness 20 mm, 8 mm shock absorber included. Wear part: replace it when the teeth are worn and "the motor runs but the blade does not turn".
gear z25 fiber general machines
Z25 fiber gear, 1.5 mm height, for General Machines slicer.
nylon gear z31 av / 35 bkl
Nylon gear with 31 teeth (Z31), transmission spare part for Berkel AV/35 slicers. Outer diameter 63 mm, bore 40 mm, height 16 mm. The nylon absorbs shocks and protects the metal gears in case of overload.
SET OF SHOCK-ABSORBING GEAR DAMPERS D.6 mm PCS 6