Bestsellers
- -10%
blade for slicer 250 diameter 25cm three hole central hole 40mm c45 rgv fac e
"
BLADE FOR SLICER 250 DIAMETER 25CM THREE HOLE CENTRAL HOLE 40MM C45 RGV FAC E
| (E) Diameter Blade | 250 | |
| (V) Number of holes | 3 | |
| (F) Dim. Central hole | 40 | |
| (H) Blade height (thickness) | 17.5 | |
| (I) Inner blade measurement (blade guard) | 210 |
VISIT THE BLOG FOR MORE INFORMATION
"
- -10%
neutral white oil pack for slicers 50 ml
Food-grade neutral white oil, 50 ml, for lubricating gravity-feed and flywheel slicers of any brand: colourless, odourless and tasteless, it protects the carriage, food pusher and blade from friction and rust. Do not use cooking oils.
- -10%
blade for slicer 220 diameter 22cm three hole central hole 40mm c45 rgv and other brands
BLADE FOR SLICER? 220/40/3/180 / 15,5 C45 FOR ABO - KOLOSSAL - OMAS -VAN DALL
(E) Diameter Blade 220
(V) Hole Number 3
(F) Dim. Central Hole 40
(H) Blade height (thickness) 15.5
(I) Internal blade size (cap) 180
VISIT THE BLOG FOR MORE INFORMATION
hand protection slicer fac and swedlinghaus model 195 220 250r 250e
Carriage hand guard for FAC and Swedlinghaus gravity-feed slicers, models 195 / 220 / 250R / 250E, CE and CE domestic versions. Safety shield between the hand and the blade during slicing: mandatory component, to be replaced if broken or missing. Hole centre distance 14.9 cm (measurement to check for compatibility). Specific to FAC/Swedlinghaus, not interchangeable with RGV models.
sirman sidney oval keyboard sticker
Adhesive label (screen-printed START/STOP membrane) for the oval keypad/push-button panel of Sirman Sidney slicers (format shared with the Leonardo model). It is applied to the shell of the oval panel, keeping the start/stop controls legible and protecting the keys. Replace when worn, faded, peeling or illegible.
Adhesive label (screen-printed membrane) for the oval keypad of the Sirman slicer, model Sidney. This is the adhesive overlay applied to the shell of the oval push-button panel, carrying the screen-printed START / STOP markings: it keeps the button functions legible and protects the panel from moisture and dirt.
The Sidney oval push-button panel is also shared with the Sirman Leonardo model: the label follows its slanted oval format.
When to replace it: when the label is worn, faded, peeling or illegible, when the membrane over the buttons is damaged or punctured, or when the keys no longer press properly because the label has deteriorated. An intact label keeps the controls clear and the panel protected.
Fitting tip: clean and degrease the surface thoroughly before application, then press the label on from the centre outwards to avoid air bubbles.
If you need the whole push-button panel and not just the label, the complete Sidney/Leonardo oval panel is available in our catalogue as a separate spare part.
Specific References
- MPN
- AGWS-1518
Customers who bought this product also bought:
fan for castellotti motors model h71
Replacement fan for Castellotti model H71 motors for meat slicers. Ensures cooling of the windings and prevents motor overheating.
- Outer Ø 105 mm
- Shaft bore Ø 11 mm
handle with flange model 300/350/370 10ma screw
HANDLE WITH FLANGE FOR MODELS 300/350/370, M10 SCREW
rgv feet with screw mod.300 / 350/370 (4 pcs)
Set of 4 feet with screw for RGV slicer mod. 300/350/370. MA8 thread, height h40 mm.
castellotti motors fan cover h71 model
Fan cover cap for Castellotti H71 motors fitted to professional slicers. Protects the cooling fan from impacts and dust and keeps it securely in place. Dimensions: outer Ø 133 mm x H 55 mm. Code AGWSAFF0565. Pairs with the fan for the same motor (code AGWSAFF0564).
- -19%
flat belt tb2 20x526 10 ribs for slicer
FLAT BELT TB2 20X526 10 RIBS
stainless steel rod mod. 350 (pin length 200 mm)
Blade-cover tie rod in stainless steel for slicer mod. 350. Thread M6, pin length 200 mm. Threaded rod that fastens the blade cover (safety guard) to the machine.
support buttons for slicer sirman leonardo 90 °
Plastic support for the push-button panel of Sirman Leonardo slicers, version with 90° mount. Houses and secures the control buttons to the machine body, keeping them stable and in the correct working position. Sirman spare part, code AGWSSIRAFF0105. Check the orientation (90°) and the shape of the original part before purchasing.
steel contact light button / no
Stainless steel pilot light push button, NO (Normally Open) contact. Replacement for slicers, dough mixers, meat grinders and bone saws by La Felsinea and Sirman.
Adhesive label (screen-printed START/STOP membrane) for the oval keypad/push-button panel of Sirman Sidney slicers (format shared with the Leonardo model). It is applied to the shell of the oval panel, keeping the start/stop controls legible and protecting the keys. Replace when worn, faded, peeling or illegible.